Structure of PepTSt from COC IMISX setup collected by still serial crystallography on crystals prelocated by 2D X-ray phase-contrast imaging
Serial Crystallography (SX)
Starting Model(s)
| Initial Refinement Model(s) |
|---|
| Type | Source | Accession Code | Details |
|---|
|
experimental model | PDB | 5D58 | |
Crystallization
| Crystalization Experiments |
|---|
| ID | Method | pH | Temperature | Details |
|---|
| 1 | LIPIDIC CUBIC PHASE | 7 | 293 | 250-325 mM NH4H2PO4, 100 mM HEPES, pH 7.0, 21-22 %(v/v) PEG 400 and 10 mM Ala-Phe |
| Crystal Properties |
|---|
| Matthews coefficient | Solvent content |
|---|
| 2.99 | 58.84 |
Crystal Data
| Unit Cell |
|---|
| Length ( Å ) | Angle ( ˚ ) |
|---|
| a = 102.43 | α = 90 |
| b = 110.7 | β = 90 |
| c = 111.28 | γ = 90 |
| Symmetry |
|---|
| Space Group | C 2 2 21 |
|---|
Diffraction
| Diffraction Experiment |
|---|
| ID # | Crystal ID | Scattering Type | Data Collection Temperature | Detector | Detector Type | Details | Collection Date | Monochromator | Protocol |
|---|
| 1 | 1 | x-ray | 100 | PIXEL | DECTRIS EIGER X 16M | | 2018-12-28 | M | SINGLE WAVELENGTH |
| Radiation Source |
|---|
| ID # | Source | Type | Wavelength List | Synchrotron Site | Beamline |
|---|
| 1 | SYNCHROTRON | SLS BEAMLINE X06SA | 1 | SLS | X06SA |
Serial Crystallography
| Sample delivery method |
|---|
| Diffraction ID | Description | Sample Delivery Method |
|---|
| 1 | | fixed target |
| Fixed Target |
|---|
| Diffraction ID | Description | Sample Holding | Support Base | Motion control | Details | Sample Solvent |
|---|
| 1 | IMISX | IMISX | 3D-printed holder in standard goniometer base | | | |
Data Collection
| Overall |
|---|
| ID # | Resolution (High) | Resolution (Low) | Percent Possible (Observed) | Rrim I (All) | CC (Half) | Net I Over Average Sigma (I) | Redundancy | Number Reflections (All) | Number Reflections (Observed) | Observed Criterion Sigma (F) | Observed Criterion Sigma (I) | B (Isotropic) From Wilson Plot |
|---|
| 1 | 2.3 | 55.64 | 100 | 0.17 | 0.92 | 3.73 | 51.9 | | 28437 | | | |
| Highest Resolution Shell |
|---|
| ID # | Resolution (High) | Resolution (Low) | Percent Possible (All) | Percent Possible (Observed) | Rrim I (All) | CC (Half) | Mean I Over Sigma (Observed) | Redundancy | Number Unique Reflections (All) |
|---|
| 1 | 2.3 | 2.38 | 99.95 | | 2.15 | 0.33 | | 32.6 | |
Refinement
| Statistics |
|---|
| Diffraction ID | Structure Solution Method | Cross Validation method | Starting model | Resolution (High) | Resolution (Low) | Cut-off Sigma (F) | Number Reflections (Observed) | Number Reflections (R-Free) | Percent Reflections (Observed) | R-Factor (Observed) | R-Work (Depositor) | R-Work (DCC) | R-Free (Depositor) | R-Free (DCC) | Mean Isotropic B |
|---|
| X-RAY DIFFRACTION | MOLECULAR REPLACEMENT | THROUGHOUT | 5D58 | 2.3 | 55.64 | 1.34 | 28436 | 1422 | 99.92 | 0.2428 | 0.2412 | 0.25 | 0.2723 | 0.29 | 58.2949 |
| Temperature Factor Modeling |
|---|
| Anisotropic B[1][1] | Anisotropic B[1][2] | Anisotropic B[1][3] | Anisotropic B[2][2] | Anisotropic B[2][3] | Anisotropic B[3][3] |
|---|
| | | | | |
| Non-Hydrogen Atoms Used in Refinement |
|---|
| Non-Hydrogen Atoms | Number |
|---|
| Protein Atoms | 3475 |
| Nucleic Acid Atoms | |
| Solvent Atoms | 77 |
| Heterogen Atoms | 463 |
Software
| Software |
|---|
| Software Name | Purpose |
|---|
| CrystFEL | data scaling |
| PHENIX | refinement |
| PDB_EXTRACT | data extraction |
| CrystFEL | data reduction |
| PHENIX | phasing |